Memorex MP3 Player MPD8842 User Manual

MPD8842  
User’s Guide  
Personal Compact Disc  
MP3 Player  
Before operating this product,  
please read these instructions completely.  
 
SAFETY PRECAUTIONS (CONTINUED)  
INFORMATION:  
This equipment has been tested and found to comply with the limits for  
a Class B digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates,  
uses and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interfer-  
ence to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment  
does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the fol-  
lowing measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
• Do not open the CD compartment while the CD is rotating.  
• Always keep the CD compartment closed when not in use.  
• Keep all foreign objects out of the CD compartment.  
• Place the unit on a stable surface.  
• Avoid installing the unit in locations described below:  
• Places exposed to direct sunlight or close to heat radiating  
appliances such as electric heaters.  
• On top of other stereo equipment that radiates too much  
heat.  
• Placed lacking ventilation or dusty places.  
• Places subject to constant vibration.  
• Humid or moist places.  
2
 
Dear Customer:  
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of  
your musical enjoyment. Now it’s time to consider how you can maximize the fun and  
excitement your equipment offers. This manufacturer and the Electronic Industries  
Association’s Consumer Electronics Group want you to get the most out of your equipment  
by playing it at a safe level. One that lets the sound come through loud and clear without  
annoying blaring or distortion and, most importantly, without affecting your sensitive  
hearing.  
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of  
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard  
against this by setting your equipment at a safe level BEFORE your hearing adapts.  
To establish a safe level:  
• Start your volume control at a low setting.  
• Slowly increase the sound until you can hear it comfortably and clearly, and without  
distortion.  
Once you have established a comfortable sound level:  
• Set the dial and leave it there.  
Taking a minute to do this now will help to prevent hearing damage or loss in the future.  
After all, we want you listening for a lifetime.  
We Want You Listening For A Lifetime  
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since  
hearing damage from loud noise is often undetectable until it is too late, this manufacturer  
and the Electronic Industries Association’s Consumer Electronics Group recommend you  
avoid prolonged exposure to excessive noise. This list of sound levels is included for your  
protection.  
Decibel  
Level  
30  
Example  
Quiet library, soft whispers  
40  
50  
60  
70  
Living room, refrigerator, bedroom away from traffic  
Light traffic, normal conversation, quiet office  
Air conditioner at 20 feet, sewing machine  
Vacuum cleaner, hair dryer, noisy restaurant  
Average city traffic, garbage disposals, alarm clock at two feet  
80  
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT  
EXPOSURE:  
We  
WantYou  
LISTENING  
ForALifetime  
90  
Subway, motorcycle, truck traffic, lawn mower  
Garbage truck, chain saw, pneumatic drill  
Rock band concert in front of speakers, thunderclap  
Gunshot blast, jet engine  
100  
120  
140  
180  
EIA  
Rocket launching pad  
EST. 1924  
Information courtesy of the Deafness Research Foundation.  
3
 
LOCATION OF CONTROLS  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13 14 15 16  
1. Battery Compartment  
(Inside CD Compartment)  
2. DC 4.5V Jack (Rear of Unit)  
12. CD Compartment  
13. VOLUME Buttons  
(Side of Unit)  
14. Headphones Jack  
15. LINE OUT Jack  
16. HOLD Switch  
Z
3. MODE/CLEAR Button  
4. Display  
5. CD Door OPEN Switch  
6. ESP/MENU Button  
7. Skip (o)/Button  
8. STOP (I)/POWER OFF/M  
Button  
9. PLAY/PAUSE (®p)/POWER  
ON/L Button  
10. Skip (n)/® Button  
11. PROG/EQ/ENTER Button  
4
 
POWER SOURCES  
This unit requires either two (2) “AA” batteries (not included) or an AC  
adapter (not included).  
BATTERY INSTALLATION  
“Low Battery” will light in the display when  
+
batteries are low (when using battery power).  
1. Open the battery compartment door inside  
the CD Compartment by pressing in on the  
tab and then lifting it. To prevent the  
possibility of losing the cover, it cannot be  
removed.  
+
+
2. Insert two (2) “AA” batteries (not included)  
according to the polarity diagram inside the battery compartment.  
Alkaline batteries are recommended for the longest playing time.  
BATTERY PRECAUTIONS  
Follow these precautions when using batteries in this device:  
1. Use only the size and type of batteries specified.  
2. Be sure to follow the correct polarity when installing the batteries as indicated in the  
battery compartment. Reversed batteries may cause damage to the device.  
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and  
Carbon-zinc) or old batteries with fresh ones.  
4. If the device is not to be used for a long period of time, remove the batteries to  
prevent damage or injury from possible battery leakage.  
5. Do not try to recharge batteries not intended to be recharged; they can overheat and  
rupture. (Follow battery manufacturer’s directions.)  
AC OPERATION  
To operate the unit using AC power, connect an AC adapter (not  
included) to an AC outlet having 120V, 60Hz AC only. Plug the small end  
into the DC 4.5V jack on the rear of the unit and connect the other end  
into the AC outlet. The batteries are automatically disconnected when the  
AC adapter is used. DC4.5V z  
CAUTION: When not using AC power, disconnect the AC adapter from  
the wall outlet by pulling the plug (not the cord). Do not touch the AC  
adapter with wet hands. Fully insert the plug without exposing any part of  
the blade.  
5
 
CD OPERATION  
ADJUSTING THE VOLUME  
TURNING POWER ON/OFF  
1
1
1
2
You can adjust the digital volume level from  
Minimum "MIN" to Maximum "MAX" by  
pressing the VOLUME buttons.  
Press the PLAY/PAUSE (®p)/POWER  
ON/L button 1 to turn the unit on. To turn  
the unit off, press the STOP (I)/POWER  
OFF/M button 2. The unit will  
automatically shut off if stopped (CD  
Standby) for one minute.  
NOTE: If there is no disc in the CD  
compartment or the CD door is open, you  
cannot adjust the volume.  
PRESET EQUALIZER  
HOLD  
1
1
Slide to the ON position to disable the  
buttons; “Hold” will appear briefly in the  
display. When pressing the buttons on  
the CD compartment lid, “Hold” will briefly  
appear in the display. Slide to the OFF  
position to enable the buttons. For the  
HOLD function, only the buttons on the  
CD compartment lid and the VOLUME  
UP/DOWN buttons will be disabled, not  
the other controls/switches.  
Repeatedly press the PROG/EQ/ENTER  
button to cycle through the preset EQ  
settings: NORMAL, CLASSIC, POP,  
JAZZ and ROCK. The CD must be  
playing to change the EQ setting.  
Radio Sound Through a Home Audio System  
By using a home audio connection cable (not included), superb radio sound can  
be heard through your home audio system. Before making any connections, turn  
off the power to all equipment.  
Plug a connection cable (not included) between the LINE OUT jack on the side of  
the CD player and the amplifier’s AUX or CD input jack. (Do not connect it to the  
amplifier’s PHONO jack.)  
NOTE: If the radio interferes with TV reception, move the unit away from the TV or  
turn off the power to this unit.  
6
 
CD OPERATION (CONTINUED)  
TO INSERT AND PLAY A CD  
This CD player is designed to play all kinds of audio discs and MP3 CD  
Roms, such as CD recordables and rewritables. Do not try to play CDI,  
CDV, DVD or computer CDs in this unit.  
1
2
1
2
Press the PLAY/PAUSE (®p)/POWER Press the PLAY/PAUSE (®p)/POWER  
ON/L button to begin playback; the  
current track and elapsed playing time  
(CD information and folder will also  
appear, if using MP3) will appear in the  
display.  
ON/L button 1 to turn the unit on.  
Open the CD door by sliding the CD  
Door OPEN switch  
2. Gently press a  
disc, label side up, onto the spindle  
until it locks in place. Close the CD  
door.  
3
4
2
1
When the disc is through playing, it will  
Adjust the VOLUME buttons 1 and  
PROG/EQ/ENTER button 2 as desired. stop. Press the STOP (I)/POWER  
Repeatedly press the PROG/EQ/  
ENTER button 2 to cycle through the  
preset EQ settings: NORMAL,  
CLASSIC, POP, JAZZ and ROCK. The  
CD must be playing to change the EQ  
setting.  
OFF/M button to stop the disc before it  
is finished. Press the STOP  
(I)/POWER OFF/M button again to  
turn the unit off.  
7
 
CD OPERATION (CONTINUED)  
CD PLAYBACK NOTES:  
• See page 15 for more information on MP3’s.  
• When recording (“burning”) CDs, make sure the session is “finalized”, or simply  
record (“burn”) only one session. You can find more information in your  
recorder’s manual.  
• This unit is capable of playing standard CDs or 3” singles; no adapter is  
required.  
• If a disc is inserted incorrectly, dirty, damaged or not present at all, “no disc” will  
appear in the display.  
• If a disc is not recorded properly, “No File” will appear in the display.  
• Playback will stop when you open the CD compartment, but it is not  
recommended to open the compartment before the STOP (I)/POWER OFF/M  
button is pressed.  
• If there is no activity for 60 seconds, the unit will turn itself off to save the batteries.  
• It may take 10 to 30 seconds for the player to read an MP3 CD and begin  
playback, depending on the number of tracks burned on the CD.  
TO PAUSE A CD  
2
1
During CD playback, if you wish to  
pause the disc momentarily, press the  
PLAY/PAUSE (®p)/POWER ON/L  
Press the PLAY/PAUSE (®p)  
/POWER ON/L button again to  
release pause and resume playback.  
button. Playback stops but the disc The sound returns and the elapsed  
continues to spin and the elapsed time in the display stops flashing.  
time will blink in the display.  
8
 
CD OPERATION (CONTINUED)  
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK  
1
2
1
2
While in the Stop mode, you may When the desired track number (and  
file number if using MP3) appears in  
the display, press the PLAY/PAUSE  
(®p)/POWER ON/L button. Playback  
will begin with the track (or file) you  
selected.  
press either the Skip o/√ 1 or n/® 2  
button to select a specific track for  
playback.  
FORWARD/REVERSE SKIP TRACK  
1
2
During playback, press and release During playback, press and release the  
the Skip n/® button once to advance Skip o/√ button once to move the play-  
the player to the beginning of the next er back to the beginning of the current-  
track. Press the Skip n/® button ly playing track. Press the Skip o/√  
button repeatedly to move the player  
back to lower-numbered tracks.  
repeatedly to advance the player to  
higher-numbered tracks.  
9
 
CD OPERATION (CONTINUED)  
HIGH-SPEED MUSIC SEARCH  
During playback, depress and hold  
either the Skip o/√ 1 or n/® 2 button  
to move the player forward or backward  
within a track to locate a specific musical  
passage. The player will move forward  
or backward at high speed as long as  
the buttons are depressed. When you  
release the Skip o/√ 1 or n/® 2  
button, normal playback will resume.  
1
1
2
REPEAT PLAYBACK OF ONE TRACK  
1
2
2
2
1
3
To repeat a single track, while in the When the desired track number  
Stop mode, press the MODE/CLEAR appears in the display, press the  
button 1 once; “REP 1” will appear in PLAY/PAUSE (®p)/POWER ON/L  
the display. Press the Skip o/√ 2 or  
n/® 3 button to select the specific  
track that you wish to repeat.  
button 1 to begin playback. (For the  
MP3 CDs, the "REP 1" indicator will  
disappear or disappear after a few sec-  
onds.) The specific track you selected  
will be repeated continuously. To can-  
cel Repeat playback, press the  
MODE/CLEAR button 2 repeatedly  
until the MODE indicator disappears.  
To cancel repeat playback for MP3 CDs:  
1. Press the STOP (I)/POWER OFF/M button to stop playback, the selected  
Repeat indicator will appear again, press the MODE/CLEAR Button  
repeatedly until the MODE indicators disappear in the display.  
2. Press the MODE/CLEAR button once, the MODE indicator for the other mode  
will appear in the display. Press the MODE/CLEAR button repeatedly until the  
MODE indicators disappear in the display to return to normal playback.  
10  
 
CD OPERATION (CONTINUED)  
REPEAT PLAYBACK OF ALL TRACKS  
1
2
2
1
To repeat all the tracks on the CD,  
while in the Stop mode, press the  
MODE/CLEAR button twice; “REP A”  
will appear in the display.  
Press the PLAY/PAUSE (®p)/POWER  
ON/L button 1 to begin playback. (For  
MP3 CDs, the “REP A” indicator will dis-  
appear or disappear after a few sec-  
onds.) All tracks on the disc will be  
repeated continuously. To cancel Repeat  
playback, press the MODE/CLEAR but-  
ton 2 repeatedly until the MODE indica-  
tor disappears.  
REPEAT PLAYBACK OF A FOLDER (MP3 w/folders only)  
1
2
2
3
To repeat all files in a directory (MP3 CD  
only), while in the Stop mode, press the  
MODE/CLEAR button 1 three times; “REP  
D” will appear in the display. Press the Skip  
o/√ 2 or n/® 3 button to select the spe-  
cific directory that you wish to repeat.  
Press the PLAY/PAUSE (®p)/  
POWER ON/L button to begin play-  
back. (The “REP D” indicator will dis-  
appear or disappear after a few sec-  
onds.) All files in the selected directory  
will be repeated continuously. See  
page 15 for more info on MP3 format.  
To cancel repeat playback for MP3 CDs:  
1. Press the STOP (I)/POWER OFF/M button to stop playback, the selected  
Repeat indicator will appear again, press the MODE/CLEAR Button  
repeatedly until the MODE indicators disappear in the display.  
2. Press the MODE/CLEAR button once, the MODE indicator for the other mode  
will appear in the display. Press the MODE/CLEAR button repeatedly until the  
MODE indicators disappear in the display to return to normal playback.  
11  
 
CD OPERATION (CONTINUED)  
INTRO PLAYBACK (Will play the first 10 seconds of each track)  
1
2
2
1
While in the Stop mode, press the  
MODE/CLEAR button 3 times (4 times  
if an MP3 CD with multiple directories  
is inserted); “INT” will appear in the  
display.  
Press the PLAY/PAUSE (®p)/POWER  
ON/L button 1 to begin Intro playback.  
(For MP3 CDs, the “INT” indicator will  
disappear or disappear after a few sec-  
onds.) The first 10 seconds of all tracks  
on the disc will be played in sequence.  
To cancel Intro playback, press the  
MODE/ CLEAR button 2 repeatedly  
until the MODE indicator disappears.  
TO RANDOMLY PLAY BACK A CD  
1
2
2
1
While in the Stop mode, press the  
MODE/CLEAR button 4 times (5 times  
if an MP3 CD with multiple directories  
Press the PLAY/PAUSE (®p)/POWER  
ON/L button 1 to begin playback. (For  
MP3 CDs, the “RND” indicator will  
is inserted); “RND” will appear in the disappear or disappear after a few  
seconds.) The unit will play all the tracks  
in random order. When all the tracks  
have been played, the unit will stop. To  
cancel Random playback, press the  
MODE/CLEAR button 2 once.  
display.  
To cancel Intro or Random playback for MP3 CDs:  
1. Press the STOP (I)/POWER OFF/M button to stop playback, the selected  
MODE indicator will appear again, press the MODE/CLEAR Button  
repeatedly until the MODE indicators disappear in the display.  
2. Press the MODE/CLEAR button once, the MODE indicator for the other mode  
will appear in the display. Press the MODE/CLEAR button repeatedly until the  
MODE indicators disappear in the display to return to normal playback.  
12  
 
CD OPERATION (CONTINUED)  
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)  
Programming is the ability to preselect the order in which a series of tracks will be  
played.  
1
2
1
2
While in the Stop mode, press the Select a track to be programmed using the  
PROG/EQ/ENTER button. The track  
number will blink and “P-01” will appear  
in the display.  
Skip o/√ 1 or n/® 2 button. If using a  
MP3 disc, see note below.  
3
4
Press the PROG/EQ/ENTER button to  
memorize the track. Repeat steps 2  
and 3 to program additional tracks up  
to a maximum of 24 tracks.  
Press the PLAY/PAUSE (®p)/POWER  
ON/L button to begin program  
playback.  
NOTES:  
To clear the memory, while in the Stop mode, press and hold the MODE/  
CLEAR button until “P” disappears from the display.  
MP3: If an MP3 CD is inserted, you will first select the directory number in  
step 2 followed by the PROG/EQ/ENTER button, and then the file/track  
number.  
SEE TOP OF NEXT PAGE FOR MORE NOTES ON PROGRAMMING  
THE MEMORY.  
13  
 
CD OPERATION (CONTINUED)  
NOTES ON PROGRAM PLAYBACK  
You can review the program by pressing the PROG/EQ/ENTER button  
repeatedly while in the Stop mode.  
To add a track to the program memory, simply press the PROG/EQ/  
ENTER button repeatedly until the track (directory for MP3) appears  
and “00” blinks in the display. Then follow steps 2 and 3 on the  
previous page.  
Press the STOP (I)/POWER OFF/M button to stop the program  
before it is finished (the program memory will be kept).  
Each file may be stored in the program memory as many times as  
desired (up to 24 files).  
You can scroll through the program while it is playing using the Skip  
o/√ or n/® button.  
ESP (ELECTRONIC SKIP PROTECTION)  
This feature protects against loss of sound caused by vibrations and  
shocks. Continuous playback is ensured once some of the music has  
been stored into memory.  
ESP will automatically be activated when listening to standard or MP3  
CDs. You cannot deactivate ESP while listening to an MP3 CD. However,  
you can deactivate it when playing a standard CD by simply pressing the  
ESP/MENU button; the ESP indicator will disappear from the display.  
Deactivating the ESP will conserve battery life.  
RESUME  
This unit has Auto resume, which will resume playback of the previous  
track when the unit is turned on (and the same CD is still in the CD  
compartment). Press the Skip o/√ or n/® button repeatedly to select  
other tracks on the disc.  
14  
 
CD OPERATION (CONTINUED)  
MP3 FAQs–Frequently Asked Questions  
Please read before playing an MP3 CD.  
Does the unit support packet write CD-RW?  
Yes, it can. You can add or delete MP3 files without  
reformatting. It appears like a PC hard drive.  
Can the unit read regular music CDs?  
Yes, it can. However, you can not mix MP3s and WAV files  
on the same CD. If you do this your Portable MP3 CD Player  
will play only the MP3 files.  
Does the unit have Electronic Skip Protection built-in?  
Yes, it has an anti-shock buffer (45 seconds for standard CD  
and 120 seconds for MP3 CD). What it means for the  
everyday user is that it can withstand road bumps, shaking,  
etc. There will be no skipping when you jog or run on a tread-  
mill or drive on a bumpy road.  
Can I use the MP3 extension for non-audio data files?  
No, this may result in serious malfunction and harmful noise  
interference.  
Can I mix MP3 files with other file types on the CDR?  
Yes, but your Portable MP3 CD Player will ignore those files  
and read only the MP3 files on the CDR.  
Does the unit support multi-session CDRs?  
If the MP3 CD is not finalized, you can burn a new group of  
MP3 files until the CD is full.  
Does the unit support subdirectories (subfolders)?  
Yes, the unit can read MP3 files from subfolders.  
What appears on the display when playing back MP3 CDs?  
The album, title and artist (if set when MP3 was recorded).  
15  
 
CD OPERATION (CONTINUED)  
SELECTING SONGS BY MP3 TITLE  
You can search for a song by title as follows:  
1
2
1
2
Select the first letter of a file you would like  
With a MP3 disc inserted, press the  
ESP/MENU button; the alphabet will  
appear in the display.  
to listen to using the Skip /√ 1 and/or  
o
/®  
2
buttons. Press the STOP  
n
(I)/POWER OFF/M button 3 to access  
the lower letters or the PLAY/PAUSE  
(®p)/POWER ON/L button 4 to access  
the higher letters.  
3
4
2
3
When the desired file appears, press  
the PROG/EQ/ENTER button and the  
file will automatically start playing.  
Press the PROG/EQ/ENTER button 1  
and a list of files starting with the  
selected letter will appear. Press the  
Skip /2 and/or /® 3 buttons to  
o
n
scroll through the list.  
NOTE:  
If you select a letter that does not contain any files, “No File” will appear  
in the display.  
16  
 
CD OPERATION (CONTINUED)  
SEARCHING THROUGH MP3 DIRECTORIES  
You can search the contents of the directories (if burned on CD) as  
follows:  
1
2
1
2
Press the ESP/MENU button twice; the To select a file from the directory, use  
first directory will appear in the display,  
as well as its contents.  
the Skip /1 and/or /® 2 buttons.  
o
n
3
4
1
2
When the desired file appears, press  
the PROG/EQ/ENTER button and the  
file will automatically start playing.  
If you would like to change directories,  
use the PLAY/PAUSE (®p)/POWER  
ON/L 1 and/or STOP (I)/POWER  
OFF/M 2 buttons.  
17  
 
CD OPERATION (CONTINUED)  
SINGLE SESSION  
The chart below is an example of a Windows Explorer display that will  
appear on your computer monitor for a single session MP3 CD Rom with  
directories/albums. Check the added notes to help you understand the  
MP3 CD unit display and the playback sequence of directories/albums  
and tracks on a single session MP3 CD.  
MULTI SESSION  
The computer user does not need to finalize the CDR disc as music is  
burned on the CD. Because of this, the music can be downloaded at  
different times until the whole CD is full.  
(E) CD-ROM drive  
Directory 01  
Skipped  
Blur01.mp3  
Blur02.mp3  
Blur03.mp3  
Blur04.mp3  
Blur.jpg  
Lyric.doc  
Directory 02  
Directory 03  
Spice05.mp3  
Spice06.mp3  
Girl09.mp3  
Girl10.mp3  
Directory 04  
Directory 05  
2men07.mp3  
burt02.mp3  
Boyz11.mp3  
Boyz12.mp3  
Skipped  
Directory 06  
Bread13.mp3  
Abba01.wav  
Abba02.wav  
Directory 07  
Marx14.mp3  
Twain15.mp3  
NOTES:  
The arrow pathway shows the sequence of MP3 directory and file  
playback.  
• This example has a total of seven MP3 directories.  
• Based on this layout, the first file will be “Blur01.mp3” and the last file  
will be “Twain15.mp3”.  
• “Skipped” denotes a directory which contains non-audio files only, e.g.  
jpg, wav, etc. These cannot be detected nor played on this player.  
When an album contains mixed format files, the non-MP3 files will be  
skipped.  
18  
 
CARE AND MAINTENANCE  
Caring for Compact Discs  
Treat the compact disc carefully. Handle the  
compact disc only by its edges. Never allow your  
fingers to come in contact with the shiny, unprinted  
side of the compact disc.  
Do not attach adhesive tape, stickers, etc. to  
the compact disc label.  
Clean the compact disc periodically with a soft, lint-free, dry cloth. Never use  
detergents or abrasive cleaners to clean the compact disc. If necessary, use a  
CD cleaning kit.  
If a compact disc skips or gets stuck on a section of the compact disc, it is  
probably dirty or damaged (scratched).  
When cleaning the compact disc, wipe in straight lines from the center of the  
compact disc to the outer edge of the compact disc. Never wipe in circular  
motions.  
Compact discs should be stored in their cases after each use to avoid  
damage.  
Do not expose compact discs to direct sunlight, high humidity, high  
temperatures or dust, etc. Prolonged exposure or extreme temperatures can  
warp the compact disc.  
Do not stick or write anything on either side of the compact disc. Sharp writing  
instruments, or the ink, may damage the surface.  
Cleaning the Unit  
To prevent fire or shock hazard, disconnect your unit from the AC power  
source when cleaning.  
The finish on your unit may be cleaned with a dust cloth and cared for as other  
furniture. Use caution when cleaning and wiping the plastic parts.  
Mild soap and a damp cloth may be used on the front panel.  
19  
 
TROUBLESHOOTING GUIDE  
If you experience a problem with this unit, check the chart below before  
calling for service.  
SYMPTOM  
Unit will not  
CAUSE  
SOLUTION  
Dead batteries, or not Replace batteries, and install  
turn on.  
installed properly.  
Weak or dead  
properly.  
Recharge or replace  
Rechargeable batteries. batteries.  
AC adapter  
not connected.  
CD compartment  
not closed.  
Disc inserted  
incorrectly.  
Dirty or defective  
disc.  
Check AC adapter  
connection.  
Close CD compartment.  
Disc will not play.  
Reinsert disc correctly.  
Try another disc.  
Moisture  
condensation  
on disc.  
Wipe disc with soft  
cloth.  
Erratic CD playback.  
Dirty or defective  
disc.  
Clean or replace disc.  
No sound from  
headphones.  
Headphone  
plug not inserted  
correctly.  
Reinsert headphone  
plug correctly.  
Volume set  
Increase volume.  
to minimum.  
Weak batteries.  
Defective disc.  
ESP is not activated.  
Replace batteries.  
Try another disc.  
Press the ESP/MENU button.  
ESP not working.  
20  
 
SPECIFICATIONS  
Power Requirement DC............................2 x AA (LR6) Alkaline batteries  
Power Requirement AC...................DC IN 4.5V Adapter (center positive)  
Output Level (Line Out) ............................................0.6VMS (47K Ohms)  
Output Level (Headphones) ..........................................16mW (32 Ohms)  
MPEG Rate ............................................................................32-384Kbps  
Sampling Frequency ..................................8/11.025/12KHz for MPEG2.5  
16/22.05/24KHz for MPEG2  
32/44.1/48KHz for MPEG1  
MP3 Playback ................................................ISO9660 format compatible  
Check the CD burner/recorder’s documentation to see if it complies with  
these specifications.  
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE,  
PLEASE VISIT OUR WEBSITE AT  
WWW.MEMOREXELECTRONICS.COM  
OR CONTACT CUSTOMER SERVICE AT (954) 660-7100.  
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST  
90 DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT  
TO YOUR PLACE OF PURCHASE OR MEMOREX.  
FOR PARTS AND ACCESSORIES, CONTACT FOX  
INTERNATIONAL AT 1-800-321-6993.  
21  
 
Memcorp, Inc.  
Weston, FL  
Printed in Hong Kong  
 

Kustom Stereo Amplifier KBA 30X User Manual
Lenmar Enterprises Battery Charger PPU5000 User Manual
LG Electronics Projector HS102 User Manual
Linak Battery Charger 00CH01AUS 00 User Manual
Makita Power Hammer HR2410 User Manual
Makita Trimmer UM140D User Manual
Mark Levinson Car Amplifier N28 User Manual
Maytag Range MGR5875QDW User Manual
Memorex DVD Player MVDP1101 User Manual
Memorex Stereo System MX4111 User Manual