Land Pride Universal Remote 700 033A User Manual

ST Back Screen  
Assembly Instructions  
Treker ST 00 & 10 Series  
Manual No. 701-134M  
Before You Start  
Assembly Instructions  
A detailed listing of parts for this accessory kit is provided  
on page 2. Use the list as a checklist to inventory parts  
received. Please contact your local Land Pride dealer for  
any missing hardware.  
When you see this symbol, the subsequent  
instructions and warnings are serious - follow  
without exception. Your life and the lives of  
others depend on it!  
!
ALL DIRECTIONS REFERRING TO THE RIGHT AND  
LEFT ARE WHEN THE OPERATOR IS ON THE  
MACHINE.  
IMPORTANT: Before you begin, read these  
instructions and check to be sure all parts and tools  
are accounted for. Please retain these installation  
instructions for future reference and parts ordering  
information.  
Your ST Back Screen is exclusively designed for your  
Land Pride ST Treker. Please read these installation  
instructions and your ST Treker Operator’s Manual  
thoroughly before beginning. Especially read information  
relating to safety concerns. Also included in the  
Operator’s Manual is important information on operation,  
adjustment, troubleshooting, and maintenance for this  
attachment (some manual sections do not apply to all  
accessories).  
General Information  
These assembly instructions apply to the following ST  
Back Screen Accessories listed below:  
700-033A  
ST Back Screen  
1. Space the six 1-3/4" U-Clamps (#2) and the six 1-1/2"  
U-Clamp Spacers (#3) on the roll cage.  
Further Assistance  
2. Center the Back Screen (#1) in the inside of the roll  
cage.  
Your dealer wants you to be satisfied with your new ST  
Back Screen. If for any reason you do not understand  
any part of this manual or are not satisfied with the  
service received, the following actions are suggested:  
3. Attach the Back Screen (#1) to the roll cage with the  
six 1-3/4" U-Clamps (#2) using six 5/16" x 2-1/2" bolts  
(#4) and the six 1-1/2" U-Clamp Spacers (#3).  
1. Discuss the matter with your dealership service  
manager making sure he is aware of any problems  
you may have and that he has had the opportunity to  
assist you.  
4. Make adjustments to the Back Screen (#1) alignment  
as needed. Fully tighten attaching hardware at this time.  
2. If you are still not satisfied, seek out the owner or  
general manager of the dealership, explain the  
problem and request assistance.  
3. For further assistance write to:  
Land Pride Service Department  
1525 East North Street  
P.O. Box 5060  
Salina, Ks. 67402-5060  
E-mail address  
© Copyright 2007  
Printed  
06/27/07  
 
1

Krell Industries Stereo Amplifier PAM 5 User Manual
LG Electronics Amplified Phone IP LDK 20 User Manual
LG Electronics Car Satellite TV System 26LT670H User Manual
LG Electronics Cell Phone UX390 User Manual
LG Electronics Cell Phone VX9200Maroon User Manual
Lincoln Automobile 2006 LS User Manual
Lincoln Electric Welder 712A80 SR User Manual
Lincoln Electric Welding Consumables M332 User Manual
Magic Chef Refrigerator MCBC58DSTF User Manual
Maytag Washer Dryer MVP8600TB0 User Manual